MOS-620CT,20MHz Component Test Analog Oscilloscope

MOS-620CT,20MHz Component Test Analog Oscilloscope

20MHz Component Test Analog Oscilloscope.High luminance,internal graticule CRT.

Specifications

Descroption  of this MOS-620CT,20MHz Component Test Analog Oscilloscope

The following is about MOS-620CT,20MHz Component Test Analog Oscilloscope related Descroption, I hope to help you better understand MOS-620CT,20MHz Component Test Analog Oscilloscope.

●High luminance,internal graticule CRT

●Japanese electronic encoder,light,handy and reliable

●Fully sealed long live vertical mode switch

●ALT Triggering Function. Two indepen dent signals

●Simultaneous observation

●Build-in Component Test Operating

●20MHz bandwidth with dual channel

●10 times sweep magnification

●TV Synchronization,X-Y mode

The above is the Descroption for MOS-620CT,20MHz Component Test Analog Oscilloscope. If you want to know more about analog oscilloscope price, analog oscilloscope kit, etc., you can contact us.

Parameter  of this MOS-620CT,20MHz Component Test Analog Oscilloscope

The following is about MOS-620CT,20MHz Component Test Analog Oscilloscope related Parameter, I hope to help you better understand MOS-620CT,20MHz Component Test Analog Oscilloscope.

Model MOS-620CT MOS-640CT MOS-650CT
Vertical Axis
Frequency bandwidth DC~20MHz DC~40MHz DC~50MHz
Rise time Approx.17.5ns Approx.8.75ns Approx.7ns
Sensitivity 5mV~5V/DIV,10 steps in 1-2-5 sequence
Vernier Vertical sensitivity To l/2.5 o r less of panel-indicated value.
AC coupling Low limit frequency10Hz. (With reference to 100KHz, 8DIV. Frequency responsewith-3dB.)
Input impedance Approx . lMohm //Approx.25pF
Linear ity Adjustable on panel
Vertical modes ≤± 0.l DIV of amplitude change when waveform of 2 DIV at graticule center is moved vertically.
DC balance shift CHI :CHl single channel.
CH2 :CH2 single channel.
DUAL :CHI and CH2 are displayed. ALT or CHOP selectable at any sweep rate.
ADD:CH1+CH2 algebraic addition.
Chopping repetition frequency Approx.250kHz
Input coupling AC, GND, DC
Maximum input voltage 400V (DC+AC peak),AC:freq uency lkHz or lower.
Common mode rejection ratio 50:1 or better at 50KHz sinusoidal wave(When sensitivities of Ch1 and Ch2 are set equally)
Isolation between channels
(At 5mV/DIV range)
>1000:1 at 50KHz
>30:1 at 15MHz >30:1 at 35MHz >30:1 at 45MHz
CH2 INV BAL Balanced point variation:≤1DIV (Reference at center graticule)
Triggering
Triggering source CH1,CH2,LINE,EXT,ALT
Coupling: AC 20Hz to full bandwidth
SLOPE +/-
Sensitivity 20Hz~2MHz:0.5DIV, TRIG-ALT:2 DIV, EXT:200mV
2~20MHz:1.5 DIV 2~40MHz:2.5 DIV 2~50MHz:3.0 DIV
TRIG-ALT:3DIV, EXT:800mV;  TV: Sync pulse more than 1 div(EXT:l V)
Triggering modes AUTO,NORM,TV-V,TV-H
EXT triggering signal input
Input impedance
Max.input voltage
Approx:1MΩ/approx.25pF;
400V (DC+AC peak), AC: Frequency not higher than 1KHz
Horizontal System
Sweep time 0.2uSec~0.5Sec/DIV,20steps in 1-2-5 sequence
Sweep time accuracy ±3%
Vernier sweep time control ≤1/2.5 of panel-indicated value
Sweep magnification 10 times
×10MAG sweep time accuracy ±5% (20nSec~50nSec are uncalibrated)
Linearity ±5%, xl0MAG:±10%(0.2s and1 s )
Position shift caused by ×10MAG within 2DIV. At CRT screen center
X-Y Mode
Frequency bandwidth DC to at least 500KHz
X-Y phase difference ≤3°at DC~50KHz
Sensitivity Same as vertical axis. (X-axis:CH1 input signal; Y-axis:CH2 input signal.)
Calibration Voltage
Waveform Positive-going square wave
Frequency Approx. 1kHz
Duty ratio Within 48:52
Output voltage 2Vp-p±2%
Output impedance Approx.1KΩ
CRT
Type 6-inch rectangular type, internal graticule
Phosphor P31
Acceleration voltage  Approx.2KV(20MHz)/Approx.12kv(40MHz)
Effective screen size 8×10DIV[1DIV=10mm(0.39in)]
Graticule Internal
Trace rotation Provided
Dimensions 310W x150Hx 455 D(mm)
Weight Approx.8kg

If you want to know more Parameter MOS-620CT,20MHz Component Test Analog Oscilloscope, or other related best analog oscilloscope, analog oscilloscope for sale…. and other products Parameter,you can contact us.

Image  of this MOS-620CT,20MHz Component Test Analog Oscilloscope

The following is about MOS-620CT,20MHz Component Test Analog Oscilloscope related Image, I hope to help you better understand MOS-620CT,20MHz Component Test Analog Oscilloscope.

20MHz Component Test Analog Oscilloscope analog oscilloscope

If you want to know MOS-620CT,20MHz Component Test Analog Oscilloscope, more related products Image, such as oscilloscope input, and simple oscilloscope… etc., you can contact us directly. We can provide you with more MOS-620CT,20MHz Component Test Analog Oscilloscope, related information, or oscilloscope cost, or component tester oscilloscope… information sent to your e-mail.

Our Factory  of this MOS-620CT,20MHz Component Test Analog Oscilloscope

[company name] is located at [China][Shanghai], Our factory has more experience in production MOS-620CT,20MHz Component Test Analog Oscilloscope,and we can provide multiple types related products, such as oscilloscope basics,oscilloscope measures,crt oscilloscope,buy oscilloscope,oscilloscope bandwidth,etc. If you want to know more details about these, welcome to contact us!


You might also like